EudraGMP Homepage      
 
 
MIA | GMP | API REG | WDA | GDP | Sites Help
Tue 10 Nov 2026 13:12:25 BST
GMP Compliance Menu 
Search
GMP Certificates
Non-Compliance Report


Print Preview
                   
Print Preview (Short version)
                  
Back To Search

 

Italian Medicines Agency

CERTIFICATE NUMBER: IT-API/110/H/2024

CERTIFICATE OF GMP COMPLIANCE OF A MANUFACTURER(1) , (2)

Part 1

Issued following an inspection in accordance with
Art. 111(5) of Directive 2001/83/EC as amended

The competent authority of Italy confirms the following:

The manufacturer: F.I.S. Fabbrica Italiana Sintetici S.p.A.

Site address: Viale Milano 26, Montecchio Maggiore, 36075, Italy

OMS Organisation Id. / OMS Location Id.: ORG-100011866 / LOC-100022277


Is an active substance manufacturer that has been inspected in accordance with Art. 111(1) of Directive 2001/83/EC0.

From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on  2023-08-04 , it is considered that it complies with:

  • The principles of GMP for active substances referred to in Article 47 of Directive 2001/83/EC and an appropriate level of GMP as referred to in Article 46(f) of Directive 2001/83/EC.
    		•

    This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. Updates to restrictions or clarifying remarks can be identified through the EudraGMDP website (https://eudragmdp.ema.europa.eu/). This certificate is valid only when presented with all pages and both Parts 1 and 2.

     The authenticity of this certificate may be verified in EudraGMDP. If it does not appear, please contact the issuing authority.

    __________________________________________________________________________________________________________________________
    (1) The certificate referred to in paragraph Art. 111(5) of Directive 2001/83/ECis also applicable to importers.
    (2) Guidance on the interpretation of this template can be found in the Interpretation of the Union format for GMP certificate.
    (3) These requirements fulfil the GMP recommendations of WHO.

    Part 2

    Human Medicinal Products

    Manufacture of active substance. Names of substances subject to inspection:
    [00000000004222]DEXKETOPROFEN TROMETAMOL(en)
    [00000000001788]PHLOROGLUCINOL ANHYDROUS(en)
    [00000000001823]FLUNITRAZEPAM(en)
    [00000000001873]FLURAZEPAM(en)
    [00000000002687]MIDAZOLAM(en)
    [00000000005922]ETORICOXIB TOSYLATE SALT(en)
    [00000000002422]LEVOTHYROXINE SODIUM(en)
    [00000000007317]ATALUREN(en)
    [00000000007486]IVABRADINE HYDROCHLORIDE(en)
    [00000000008089]REMDESIVIR(en)
    [00000000007326]TEZACAFTOR(en)
    [00000000005777]ARMODAFINIL(en)
    [00000000001907]CREATINE PHOSPHATE DISODIUM(en)
    [00000000001951]FUROSEMIDE(en)
    [00000000003699]TESTOSTERONE(en)
    [00000000003700]TESTOSTERONE CYPIONATE(en)
    [00000000007001]ESOMEPRAZOLE MAGNESIUM DIHYDRATE(en)
    [00000000001294]DEXKETOPROFEN(en)
    [00000000005751]NELARABINE(en)
    [00000000001771]FINASTERIDE(en)
    [00000000001871]FLURAZEPAM DIHYDROCHLORIDE(en)
    [00000000005691]DABIGATRAN ETEXILATE(en)
    [00000000002833]NITRAZEPAM(en)
    [00000000002192]IMATINIB MESILATE(en)
    [0000000000764]CARBAMAZEPINE(en)
    [00000000001019]CLOBAZAM(en)
    [00000000001028]CLOMIPHENE CITRATE(en)
    [00000000007093]PERAMPANEL(en)
    [00000000007718]ENCLOMIFENE CITRATE(en)
    [00000000005775]TRIMETYLPHLOROGLUCINOL(en)
    [00000000002835]NITROFURANTOIN(en)
    [00000000003206]PRAZEPAM(en)
    [00000000003270]PROCARBAZINE HYDROCHLORIDE(en)
    [00000000003329]QUETIAPINE FUMARATE(en)
    [00000000003703]TESTOSTERONE PROPIONATE(en)
    [00000000001030]CLONAZEPAM(en)
    [00000000005991]PRASTERONE ACETATE(en)
    [00000000005976]PENTAZOCINE(en)
    [00000000007734]NILOTINIB DIHYDROCHLORIDE DIHYDRATE(en)
    [0000000000100009]OMARIGLIPTIN(en)
    [0000000000100272]NEMTABRUTINIB(en)
    [00000000008112]TROFINETIDE(en)
    [00000000008782]Edoxaban tosylate(en)
    [00000000001548]ERLOTINIB HYDROCHLORIDE(en)
    [00000000001568]ESTAZOLAM(en)
    [00000000002689]MIDAZOLAM MALEATE(en)
    [00000000002371]LANSOPRAZOLE(en)
    [00000000001109]CLOTRIMAZOLE(en)
    [00000000007113]VEMURAFENIB(en)
    [00000000008067]CERITINIB(en)
    [00000000007837]SOTAGLIFLOZIN(en)
    [00000000007631]VALBENAZINE TOSYLATE(en)
    [00000000007183]ALOGLIPTIN HYDROCHLORIDE(en)
    [00000000001208]DELORAZEPAM(en)
    [00000000004055]XIBORNOL(en)
    [00000000005776]FEBUXOSTAT(en)
    [00000000001473]ELETRIPTAN HYDROBROMIDE(en)
    [00000000004104]SITAGLIPTIN PHOSPHATE MONOHYDRATE(en)
    [00000000002228]INDOMETACIN(en)
    [00000000005839]VILDAGLIPTIN(en)
    [00000000003278]PROGESTERONE(en)
    [00000000002922]OXCARBAZEPINE(en)
    [00000000003668]TEMAZEPAM(en)
    [00000000001062]CHLORDIAZEPOXIDE(en)
    [00000000008179]SUGAMMADEX(en)
    [00000000007807]OMECAMTIV MECARBIL(en)
    [00000000001299]DIAZEPAM(en)
    [00000000005831]RANOLAZINE(en)
    [0000000000643]BROMAZEPAM(en)
    [00000000001565]ESOMEPRAZOLE MAGNESIUM TRIHYDRATE(en)
    [00000000001789]PHLOROGLUCINOL HYDRATE(en)
    [00000000002688]MIDAZOLAM HYDROCHLORIDE(en)
    [00000000002479]LORAZEPAM(en)
    [00000000003048]PENTAZOCINE HYDROCHLORIDE(en)
    [00000000001061]CHLORDIAZEPOXIDE HYDROCHLORIDE(en)
    [00000000005957]OLOPATADINE HYDROCHLORIDE(en)
    [00000000008114]PAZOPANIB HYDROCHLORIDE(en)
    [00000000001465]EFAVIRENZ(en)
    [00000000001872]FLURAZEPAM MONOHYDROCHLORIDE(en)
    [00000000001882]FLUVASTATIN SODIUM(en)
    [00000000002836]NITROFURANTOIN MACROCRYSTALS(en)
    [00000000002838]NITROFURANTOIN MONOHYDRATE(en)
    [00000000002352]KETAZOLAM(en)
    [00000000002921]OXAZEPAM(en)
    [00000000003702]TESTOSTERONE UNDECANOATE(en)
    [00000000003842]TRAMAZOLINA CLORIDRATO(en)
    [00000000005923]DEXLANSOPRAZOLE(en)
    [00000000007080]INDOMETACIN SODIUM(en)

    3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES

    Active Substance:DEXKETOPROFEN TROMETAMOL
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:PHLOROGLUCINOL ANHYDROUS
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUNITRAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLURAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MIDAZOLAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ETORICOXIB TOSYLATE SALT
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:LEVOTHYROXINE SODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    salt formation,crystallisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ATALUREN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    purification
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:IVABRADINE HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:REMDESIVIR
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:TEZACAFTOR
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ARMODAFINIL
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CREATINE PHOSPHATE DISODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FUROSEMIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    salt formation,purification
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TESTOSTERONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TESTOSTERONE CYPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ESOMEPRAZOLE MAGNESIUM DIHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DEXKETOPROFEN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    acidification and crystalisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NELARABINE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:FINASTERIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLURAZEPAM DIHYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    satl formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DABIGATRAN ETEXILATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    drying
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NITRAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:IMATINIB MESILATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Cytotoxic
    3.1.3  Salt formation / Purification steps:
    crystallisation,salt formation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:CARBAMAZEPINE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CLOBAZAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CLOMIPHENE CITRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PERAMPANEL
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:ENCLOMIFENE CITRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    crystallisation,salt formation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling/micronisation
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TRIMETYLPHLOROGLUCINOL
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NITROFURANTOIN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PRAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PROCARBAZINE HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Cytotoxic
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    drying
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:QUETIAPINE FUMARATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TESTOSTERONE PROPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CLONAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PRASTERONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PENTAZOCINE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NILOTINIB DIHYDROCHLORIDE DIHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Cytotoxic
    3.1.3  Salt formation / Purification steps:
    crystallisation,salt formation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling/micronisation
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:OMARIGLIPTIN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:NEMTABRUTINIB
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Cytotoxic
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    drying
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TROFINETIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    extraction/phase separation
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    spray drying
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:Edoxaban tosylate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    crystallisation,salt formation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    milling,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:ERLOTINIB HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    crystallisation,salt formation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling/micronisation
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ESTAZOLAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MIDAZOLAM MALEATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:LANSOPRAZOLE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:CLOTRIMAZOLE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:VEMURAFENIB
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling,micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CERITINIB
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Cytotoxic
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling/micronisation
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:SOTAGLIFLOZIN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:VALBENAZINE TOSYLATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling/micronisation
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:ALOGLIPTIN HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DELORAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:XIBORNOL
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:FEBUXOSTAT
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:ELETRIPTAN HYDROBROMIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:SITAGLIPTIN PHOSPHATE MONOHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    salt formation,crystallisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:INDOMETACIN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:VILDAGLIPTIN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling,micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:PROGESTERONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:OXCARBAZEPINE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TEMAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CHLORDIAZEPOXIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:SUGAMMADEX
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling/micronisation
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:OMECAMTIV MECARBIL
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    salt formation,crystallisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DIAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:RANOLAZINE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BROMAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ESOMEPRAZOLE MAGNESIUM TRIHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    salt formation,crystallisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PHLOROGLUCINOL HYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MIDAZOLAM HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:LORAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PENTAZOCINE HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CHLORDIAZEPOXIDE HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:OLOPATADINE HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PAZOPANIB HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.1.3  Salt formation / Purification steps:
    salt formation,crystallisation
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,sieving,milling
    3.6 Quality Control Testing
     
    3.6.2  Microbiological testing excluding sterility testing
    3.6.1  Physical / Chemical testing

    Active Substance:EFAVIRENZ
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLURAZEPAM MONOHYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUVASTATIN SODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    salt formation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    lyophilisation, hydratation, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NITROFURANTOIN MACROCRYSTALS
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NITROFURANTOIN MONOHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:KETAZOLAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:OXAZEPAM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TESTOSTERONE UNDECANOATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TRAMAZOLINA CLORIDRATO
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DEXLANSOPRAZOLE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystalisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying, milling/micronisation, sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:INDOMETACIN SODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    crystallisation
    3.1.2  Manufacture of crude active substance
    3.1.1  Manufacture of active substance intermediates
    3.5 General Finishing Steps
     
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.1  Physical processing steps:
    drying,milling/micronisation,sieving
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    4. Other Activities - Active Substances:
    Importation of: 19-NOR-4-ANDROSTENE-3,17-DIONE (confidential), DBO06 (confidential), IDASANUTLIN (confidential), ISOXEPAC (confidential), L-CYSTEINE (confidential), N-BENZOILCARBONILGLICINA/ N-BENZOYLCARBONYLGLYCINE (confidential), TANIBORBACTAM CLORIDRATO (confidential), TROMETAMOL CRUDE (confidential)

    Clarifying remarks (for public users):
    Manufactured active substances (AS) marked as confidential are for clinical use only. Imported active substances (AS) marked as confidential are used for manufacturing AS and medicinal products within the importing site and/or a contractor. Importation of AS used for manufacturing medicinal products falls under the responsibility of the QP/QPs listed in the MIA. On a risk-based approach, the validity of the GMP certificate for this manufacturing site is not more than 30 months from the latest general GMP inspection conducted on 2022/05/06, except for AIFA¿s re-evaluation of the risk profile.

     

     


    		 
    		 
     
         
     
     
    		 
     
    The EudraGMDP database is maintained and operated by the EMA. Access to the general public is granted in order to enhance availability of information related to the EMA mandate. The content of the database is provided by the National Competent Authorities (NCA) of the EEA. For this reason, the EMA accepts no responsibility or liability whatsoever (including but not limited to any direct or consequential loss or damage it might occur to you and/or any other third party) arising out of or in connection with the information on this database. Any questions about the content should be addressed to the relevant NCA. Please click here to get list of NCA's.

    For the UK, as from 1.1.2021, EU Law applies only to the territory of Northern Ireland (NI) to the extent foreseen in the Protocol on Ireland/NI.

    Documents issued by UK authorities up to and including 31 December 2020 remain available for consultation in EudraGMDP. However, they are no longer included or updated from 1 January 2021, with the exception of the documents pertaining to sites located in Northern Ireland.
    [EMA © 2014. EudraGMDP 6.5.4.8 build 2026/01/16 09:45]