| 3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES |
Active Substance:Calciumchloride-2-hydrate |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Calciumchloride-6-hydrate |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Calciumchloride solution |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Filtration
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Magnesiumchloride-6-hydrate |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Magnesiumchloride-4,5-hydrate |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Dehydration
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Magnesiumsulfate dehydrated |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Dehydration
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Sodiumsulfate-10-hydrate |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Trocknen
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Ammoniumsulfate |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Potassiumchloride |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Grinding
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Potassiumchloride with Magnesiumstearate |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Grinding, mixing
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Magnesiumsulfate-7-hydrate |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.3 Salt formation / Purification steps: Kristallisation
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Sodiumacetate-3-hydrate |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Sodiumchloride |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Grinding
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Sodiumhydrogencarbonate |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Urea |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:Sodiumcarbonate |
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|