Eudra GMP - Public Layout

MIA | GMP | API REG | WDA | GDP | Sites

Help

Tue 10 Nov 2026 13:51:29 BST

GMP Compliance Menu

GMP Certificates

Non-Compliance Report

Print Preview

Print Preview (Short version)

Back To Search

National Agency For The Safety Of Medicine And Health Products

CERTIFICATE NUMBER: 24MPP056HFR01

CERTIFICATE OF GMP COMPLIANCE OF A MANUFACTURER(1) , (2)

Part 1

Issued following an inspection in accordance with
Art. 111(5) of Directive 2001/83/EC as amended

The competent authority of France confirms the following:

The manufacturer: Valdepharm

Site address:

Parc Industriel D Incarville, Parc De La Fringale, Cs 10606, Val De Reuil Cedex, 27106, France

OMS Organisation Id. / OMS Location Id.: ORG-100011898 / LOC-100018788

Is an active substance manufacturer that has been inspected in accordance with Art. 111(1) of Directive 2001/83/EC0.

From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on 2024-12-13 , it is considered that it complies with:

The principles of GMP for active substances referred to in Article 47 of Directive 2001/83/EC and an appropriate level of GMP as referred to in Article 46(f) of Directive 2001/83/EC.

This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. Updates to restrictions or clarifying remarks can be identified through the EudraGMDP website (https://eudragmdp.ema.europa.eu/). This certificate is valid only when presented with all pages and both Parts 1 and 2.

The authenticity of this certificate may be verified in EudraGMDP. If it does not appear, please contact the issuing authority.

__________________________________________________________________________________________________________________________

(1) The certificate referred to in paragraph Art. 111(5) of Directive 2001/83/ECis also applicable to importers.
(2) Guidance on the interpretation of this template can be found in the Interpretation of the Union format for GMP certificate.
(3) These requirements fulfil the GMP recommendations of WHO.

Part 2

Human Medicinal Products

Manufacture of active substance. Names of substances subject to inspection:

[840]BICALUTAMIDE(en)

[841]ESTRADIOL BENZOATE(en)

[898]ESTRADIOL VALERATE(en)

[338]HYDROCORTISONE HYDROGEN SUCCINATE(en)

[1673]NORETHISTERONE(en)

[1674]NORETHISTERONE ACETATE(en)

[1672]SODIUM ISOSPAGLUMATE(en)

[285]ESTRADIOL HEMIHYDRATE(en)

[655]MEDROXYPROGESTERONE ACETATE(en)

[421]METHYLPREDNISOLONE HYDROGEN SUCCINATE(en)

CLOTIAPINE(en)

TRAZODONE HYDROCHLORIDE(en)

TAMOXIFEN(en)

[FR_220222]TENAPANOR DIHYDROCHLORIDE(en)

3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES

Active Substance:BICALUTAMIDE

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Micronisation

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

Active Substance:ESTRADIOL BENZOATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:ESTRADIOL VALERATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Micronisation

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:HYDROCORTISONE HYDROGEN SUCCINATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:NORETHISTERONE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
-

3.5 General Finishing Steps

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:NORETHISTERONE ACETATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Micronisation

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:SODIUM ISOSPAGLUMATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Spray drying

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:ESTRADIOL HEMIHYDRATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Micronisation

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:MEDROXYPROGESTERONE ACETATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Micronisation

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:METHYLPREDNISOLONE HYDROGEN SUCCINATE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
-

3.5 General Finishing Steps

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Active Substance:CLOTIAPINE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
Recrystallisation

3.5 General Finishing Steps

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

Active Substance:TRAZODONE HYDROCHLORIDE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.1.2  Manufacture of crude active substance

3.1.3  Salt formation / Purification steps:
-

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Milling

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

Active Substance:TAMOXIFEN

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.1  Manufacture of active substance intermediates

3.5 General Finishing Steps

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

Active Substance:TENAPANOR DIHYDROCHLORIDE

3.1 Manufacture of Active Substance by Chemical Synthesis

3.1.3  Salt formation / Purification steps:
-

3.5 General Finishing Steps

3.5.1  Physical processing steps:
Spray drying

3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)

3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

3.6 Quality Control Testing

3.6.1  Physical / Chemical testing

3.6.2  Microbiological testing excluding sterility testing

Clarifying remarks (for public users):

Sodium isopaglumate is also known as naaga salt // Tamoxifen : limited to manufacturing of intermediate Carbinolamine // Mrs Aurélie DEMARCQ, head of starting materials inspection department --- The ANSM does not issue hard copies of good practices certificates

The EudraGMDP database is maintained and operated by the EMA. Access to the general public is granted in order to enhance availability of information related to the EMA mandate. The content of the database is provided by the National Competent Authorities (NCA) of the EEA. For this reason, the EMA accepts no responsibility or liability whatsoever (including but not limited to any direct or consequential loss or damage it might occur to you and/or any other third party) arising out of or in connection with the information on this database. Any questions about the content should be addressed to the relevant NCA. Please click here to get list of NCA's.

For the UK, as from 1.1.2021, EU Law applies only to the territory of Northern Ireland (NI) to the extent foreseen in the Protocol on Ireland/NI.

Documents issued by UK authorities up to and including 31 December 2020 remain available for consultation in EudraGMDP. However, they are no longer included or updated from 1 January 2021, with the exception of the documents pertaining to sites located in Northern Ireland.