EudraGMP Homepage      
 
 
MIA | GMP | API REG | WDA | GDP | Sites Help
Tue 10 Nov 2026 10:25:56 BST
GMP Compliance Menu 
Search
GMP Certificates
Non-Compliance Report
  
The Certificate has been withdrawn, withdrawn date is : 2026-07-16


Print Preview
                   
Print Preview (Short version)
                  
Back To Search

 

Austrian Federal Office For Safety In Health Care

CERTIFICATE NUMBER: 480012-104086651

CERTIFICATE OF GMP COMPLIANCE OF A MANUFACTURER(1) , (2)

Part 1

Issued following an inspection in accordance with
Art. 111(5) of Directive 2001/83/EC as amended
Art. 94(1) of Regulation (EU) 2019/6 as amended
Art. 63 of Regulation (EU) 536/2014 as amended

The competent authority of Austria confirms the following:

The manufacturer: Sandoz GmbH

Site address: Biochemiestrasse 10, Kundl, Tyrol, 6250

OMS Organisation Id. / OMS Location Id.: ORG-100000546 / LOC-100000450


Other

(Human) API-A123(6)-R2019/6/EU,API-A111(1)-D2001/83/EC,NIP-A40-D2001/83/EC

(Veterinary) NIP-A88-R2019/6/EU

(Investigational product) NIP-A61-R2014/536/EU

From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on  2023-11-17 , it is considered that it complies with: 
  • The principles and guidelines of Good Manufacturing Practice laid down in Directive (EU) 2017/1572 and/or Commission Delegated Regulation (EU) 2017/1569, as reflected by the product categories stated in Part 2. (3)
  • The principles and guidelines of Good Manufacturing Practice laid down in Directive 91/412/EEC. (3)  
    		•

    This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. Updates to restrictions or clarifying remarks can be identified through the EudraGMDP website (https://eudragmdp.ema.europa.eu/). This certificate is valid only when presented with all pages and both Parts 1 and 2.

     The authenticity of this certificate may be verified in EudraGMDP. If it does not appear, please contact the issuing authority.

    __________________________________________________________________________________________________________________________
    (1) The certificate referred to in paragraph Art. 111(5) of Directive 2001/83/EC, Art. 80(5) of Directive 2001/82/EC and Art. 15 of Directive 2001/20/ECis also applicable to importers.
    (2) Guidance on the interpretation of this template can be found in the Interpretation of the Union format for GMP certificate.
    (3) These requirements fulfil the GMP recommendations of WHO.

    Part 2

    Human Medicinal Products
    Human Investigational Medicinal Products
    Veterinary Medicinal Products

    1  MANUFACTURING OPERATIONS
    1.4  Other products or manufacturing activity
       1.4.2  Sterilisation of active substance/ excipients/ finished product
               1.4.2.1  Filtration
       1.4.3  Other: Herstellung und Weiterverarbeitung von Zwischenprodukten für Wirkstoffe (z.B. 6-Aminopenicillansäure) / Manufacture and further processing of active substance intermediates (e.g. 6-Aminopenicillanic acid), Herstellung und Weiterverarbeitung von Zwischenprodukten für Wirkstoffe (z.B. 6-Aminopenicillansäure) / Manufacture and further processing of active substance intermediates (e.g. 6-Aminopenicillanic acid)(en)
    1.6  Quality control testing
       1.6.3  Chemical/Physical

    Manufacture of active substance. Names of substances subject to inspection:
    [900000005273]Cefozopran(en)
    [900000005274]Ceftriaxone(en)
    [900000005275]Ceftiofur Sodium (3-CFT)(en)
    [900000005276]Ceftiofur Hydrochloride (2-CFT)(en)
    [900000005277]Ceftiofur Hydrochloride (CFT.HCl)(en)
    [900000005278]Cefpodoxime Proxetil(en)
    [900000005279]Cefotiam Dihydrochloride(en)
    [900000005280]Ceftazidim Dihydrochloride(en)
    [900000005281]Cefixim (Cefixime)(en)
    [900000005282]Cefdinir (Cefdinir)(en)
    [900000005283]Cefepime(en)
    [900000005306]Cefazolin Sodium sterile(en)
    [900000005307]Ceftriaxon Sodium sterile(en)
    [900000005308]Ceftazidim sterile(en)
    [900000005309]Ceftazidim Pentahydrate for injection/Sodiumcarbonate(en)
    [900000005285]Penicillin V benzathine, 4 % lecithin(en)
    [900000005284]Penicillin V benzathine, 2 % lecithin(en)
    [900000005286]Penicillin V benzathine, 6 % lecithin(en)
    [900000005289]Penicillin V acid pulverized(en)
    [900000005291]Penicillin V potassium(en)
    Romidepsin(en)
    [900000005294]Ampicillin Sodium, sterile(en)
    [900000005293]Amoxicillin Sodium, sterile(en)
    [900000005295]Benzylpenicillin Benzathin, 1,0% lec., pulverized, sterile(en)
    [900000005297]Benzylpenicillin Benzathin, 1,0% lec., 0,2% Tween, pulverized, sterile(en)
    [900000005299]Benzylpenicillin Sodium, buffered, sterile(en)
    [900000005300]Benzylpenicillin Potassium sterile(en)
    [900000005301]Benzylpenicillin Potassium, buffered, sterile(en)
    [900000005713]Benzylpenicillin Sodium sterile(en)
    [900000005287]Penicillin V benzathine micronized(en)
    [900000005288]Amoxicillin trihydrate micronized(en)
    [900000005290]Penicillin V acid micronized(en)
    [900000005296]Benzylpenicillin Benzathin, 1,0% lec., 0,2% Tween, microfine, sterile(en)
    [900000005298]Benzylpenicillin Benzathin, micronized, sterile, Benzylpenicillin Sodium sterile(en)
    [900000005302]Benzylpenicillin Procaine, 1% lec., semi-microfine, sterile(en)
    [900000005304]Benzylpenicillin Procaine, 1% lec., microfine, buffered, sterile(en)
    [900000005303]Benzylpenicillin Procaine, 1% lec., microfine, sterile(en)
    [900000005305]Benzylpenicillin Procaine, microfine, sterile(en)

    3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES

    Active Substance:Cefozopran
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftriaxone
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftiofur Sodium (3-CFT)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftiofur Hydrochloride (2-CFT)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftiofur Hydrochloride (CFT.HCl)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Cefpodoxime Proxetil
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Cefotiam Dihydrochloride
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftazidim Dihydrochloride
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Cefixim (Cefixime)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Cefdinir (Cefdinir)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Cefepime
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Cefazolin Sodium sterile
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftriaxon Sodium sterile
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftazidim sterile
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ceftazidim Pentahydrate for injection/Sodiumcarbonate
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V benzathine, 4 % lecithin
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Other: Salt formation and enzymatic cleavage, syn…
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V benzathine, 2 % lecithin
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Other: Salt formation and enzymatic cleavage, syn…
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V benzathine, 6 % lecithin
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Other: Salt formation and enzymatic cleavage, syn…
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V acid pulverized
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Other: Salt formation and enzymatic cleavage, syn…
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V potassium
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Other: Salt formation and enzymatic cleavage, syn…
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Romidepsin
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Ampicillin Sodium, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Amoxicillin Sodium, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Benzathin, 1,0% lec., pulverized, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Benzathin, 1,0% lec., 0,2% Tween, pulverized, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Sodium, buffered, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Potassium sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Potassium, buffered, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Sodium sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren /filtration, Trocknen /drying, Mischen / mixing, Sieben/ sieving, Mahlen/ milling, Homog…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V benzathine micronized
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / Precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Salt formation and enzymatic cleavage, synthesis
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Amoxicillin trihydrate micronized
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / Precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Salt formation and enzymatic cleavage, synthesis
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Penicillin V acid micronized
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Fällung / Precipitation
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.3.4  Modification
    3.3.5  Other:
    Salzbildung und enzymatische Spaltung, Synthese / Salt formation and enzymatic cleavage, synthesis
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Benzathin, 1,0% lec., 0,2% Tween, microfine, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Benzathin, micronized, sterile, Benzylpenicillin Sodium sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Procaine, 1% lec., semi-microfine, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Procaine, 1% lec., microfine, buffered, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Procaine, 1% lec., microfine, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:Benzylpenicillin Procaine, microfine, sterile
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.3  Salt formation / Purification steps:
    Fällung und Resinbehandlung / Precipitation and resin treatment
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Filtrieren / filtration, Trocknen / drying, Mischen / mixing, Sieben / sieving, Mahlen / milling, H…
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Clarifying remarks (for public users):
    Hersteller Arzneimittel: Sandoz GmbH - Betriebsstätte / Manufacturing Site Anti-Infectives & Chemical Operations API Kundl (AICO API Kundl); Probebetrieb betreffend folgende Verfahren gültig bis 12/2026: / Regarding the following inspection cases valid until 12/2026: INS-48001…; Hersteller klinischer Prüfpräparate: Sandoz GmbH - Betriebsstätte / Manufacturing Site Anti-Infectives & Chemical Operations API Kundl (AICO API Kundl); Probebetrieb betreffend folgende Verfahren gültig bis 12/2026: / Regarding the following inspection cases valid until 12/2026: INS-48001…; Hersteller Wirkstoffe: Sandoz GmbH - Betriebsstätte / Manufacturing Site Anti-Infectives & Chemical Operations API Kundl (AICO API Kundl); Betreffend Herstellung von Zwischenprodukten für Wirkstoffe: Chemische Modifikation eines Fermentationsproduktes (Semisynthetisch) / Reg…;

     

     

    Withdrawal comments in English: Superseded because new certificate was issued following an inspection
    Withdrawal comments in National Language: Superseded because new certificate was issued following an inspection

    		 
    		 
     
         
     
     
    		 
     
    The EudraGMDP database is maintained and operated by the EMA. Access to the general public is granted in order to enhance availability of information related to the EMA mandate. The content of the database is provided by the National Competent Authorities (NCA) of the EEA. For this reason, the EMA accepts no responsibility or liability whatsoever (including but not limited to any direct or consequential loss or damage it might occur to you and/or any other third party) arising out of or in connection with the information on this database. Any questions about the content should be addressed to the relevant NCA. Please click here to get list of NCA's.

    For the UK, as from 1.1.2021, EU Law applies only to the territory of Northern Ireland (NI) to the extent foreseen in the Protocol on Ireland/NI.

    Documents issued by UK authorities up to and including 31 December 2020 remain available for consultation in EudraGMDP. However, they are no longer included or updated from 1 January 2021, with the exception of the documents pertaining to sites located in Northern Ireland.
    [EMA © 2014. EudraGMDP 6.5.4.8 build 2026/01/16 09:45]