| 3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES |
Active Substance:ESCULOSIDE |
|
3.2
|
Extraction of Active Substance from Natural Sources
|
| |
| 3.2.1 Extraction of substance from plant source |
| 3.2.6 Purification of extracted substance Plant |
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: micronisation
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:RUPATADINE FUMARATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: /
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Crumbling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:DIISOPROPYLAMINE DICHLOROACETATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:AMOROLFINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:CINCHOCAINE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:CINCHOCAINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:TREPIBUTONE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:ETIFOXINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:MOCLOBEMIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:NEFOPAM HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:STIRIPENTOL |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:SERTACONAZOLE NITRATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:FENTICONAZOLE NITRATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: -
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|