EudraGMP Homepage      
 
 
MIA | GMP | API REG | WDA | GDP | Sites Help
Tue 10 Nov 2026 08:49:44 BST
GMP Compliance Menu 
Search
GMP Certificates
Non-Compliance Report


Print Preview
                   
Print Preview (Short version)
                  
Back To Search

 

Italian Medicines Agency

CERTIFICATE NUMBER: IT-API/96/H/2025

CERTIFICATE OF GMP COMPLIANCE OF A MANUFACTURER(1) , (2)

Part 1

Issued following an inspection in accordance with
Art. 111(5) of Directive 2001/83/EC as amended

The competent authority of Italy confirms the following:

The manufacturer: Farmabios S.p.A.

Site address: Via Pavia 1, Gropello Cairoli, 27027

OMS Organisation Id. / OMS Location Id.: ORG-100011643 / LOC-100021232


Is an active substance manufacturer that has been inspected in accordance with Art. 111(1) of Directive 2001/83/EC0.

From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on  2025-03-14 , it is considered that it complies with:

  • The principles of GMP for active substances referred to in Article 47 of Directive 2001/83/EC and an appropriate level of GMP as referred to in Article 46(f) of Directive 2001/83/EC.
    		•

    This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. Updates to restrictions or clarifying remarks can be identified through the EudraGMDP website (https://eudragmdp.ema.europa.eu/). This certificate is valid only when presented with all pages and both Parts 1 and 2.

     The authenticity of this certificate may be verified in EudraGMDP. If it does not appear, please contact the issuing authority.

    __________________________________________________________________________________________________________________________
    (1) The certificate referred to in paragraph Art. 111(5) of Directive 2001/83/ECis also applicable to importers.
    (2) Guidance on the interpretation of this template can be found in the Interpretation of the Union format for GMP certificate.
    (3) These requirements fulfil the GMP recommendations of WHO.

    Part 2

    Human Medicinal Products

    Manufacture of active substance. Names of substances subject to inspection:
    [0000000002542]MEGESTROL ACETATE(en)
    [000000000688]BUSULFAN(en)
    [0000000002630]METHYLPREDNISOLONE(en)
    [0000000006159]TRIAMCINOLONE ACETONIDE STERILE(en)
    [0000000001020]CLOBETASOL PROPIONATE(en)
    [0000000002506]MELPHALAN HYDROCHLORIDE(en)
    [0000000003855]TRIAMCINOLONE DIACETATE(en)
    [0000000002635]METHYLPREDNISOLONE HYDROGEN SUCCINATE(en)
    [0000000008133]CYSTEAMINE BITARTRATE MONOHYDRATE(en)
    [0000000007192]CANNABIDIOL (SYNTHETIC)(en)
    [0000000001264]DESOXIMETASONE(en)
    [0000000001232]DEXAMETHASONE SODIUM PHOSPHATE(en)
    [0000000001812]FLUMETASONE PIVALATE(en)
    [0000000007924]VAMOROLONE(en)
    [0000000002536]MEDROXYPROGESTERONE ACETATE(en)
    [0000000001895]FORMOTEROL FUMARATE DIHYDRATE(en)
    [0000000001345]DIFLORASONE DIACETATE(en)
    [0000000004219]DELMADINONE ACETATE(en)
    [0000000003798]TIROFIBAN HYDROCHLORIDE MONOHYDRATE(en)
    [0000000006004]BECLOMETASONE DIPROPIONATE MONOHYDRATE(en)
    [0000000004337]OSATERONE ACETATE(en)
    [0000000001259]DESONIDE DISODIUM PHOSPHATE(en)
    [0000000009337]PREDNISOLONE-21-HEXANOATE(en)
    [0000000001825]FLUOCINOLONE ACETONIDE(en)
    [0000000002716]MIVACURIUM CHLORIDE(en)
    [0000000004268]FLUPREDNIDENE ACETATE(en)
    [0000000001641]EXEMESTANE(en)
    [0000000003219]PREDNISOLONE SODIUM PHOSPHATE(en)
    [000000000285]HALOMETASONE MONOHYDRATE(en)
    [000000000100861]TRIAMCINOLONE HEXACETONIDE STERILE(en)
    [0000000006005]CLOCORTOLONE PIVALATE(en)
    [0000000003217]PREDNISOLONE 17-VALERATE 21-ACETATE(en)
    [0000000007232]LOTEPREDNOL ETABONATE STERILE(en)
    [000000000165]URSODEOXYCHOLIC ACID(en)
    [0000000001347]DIFLUCORTOLONE VALERATE(en)
    [0000000007962]NORURSODEOXYCHOLIC ACID(en)
    [0000000002645]METHYLTESTOSTERONE(en)
    [0000000005327]FLUMETASONE(en)
    [0000000002725]MOMETASONE FUROATE(en)
    [0000000003444]SALMETEROL XINAFOATE(en)
    [000000000100981]FLUTICASONE PROPIONATE(en)
    [0000000005209]BECLOMETASONE DIPROPIONATE(en)
    [0000000004263]FLUDROCORTISONE(en)
    [0000000002484]LOTEPREDNOL ETABONATE(en)
    [0000000001850]FLUOROMETHOLONE(en)
    [0000000005646]TRIAMCINOLONE HEXACETONIDE(en)
    [0000000006158]BECLOMETASONE DIPROPIONATE STERILE(en)
    [0000000002144]HYDROCORTISONE ACETATE(en)
    [000000000307]AMCINONIDE(en)
    [0000000001834]FLUOCINONIDE(en)
    [0000000003209]PREDNISOLONE(en)
    [0000000007898]FLUOCORTOLONE PIVALATE(en)
    [0000000003208]PREDNICARBATE(en)
    [0000000003211]PREDNISOLONE ACETATE(en)
    [000000000215]HALCINONIDE(en)
    [0000000006157]MEDROXYPROGESTERONE ACETATE STERILE(en)
    [0000000001880]FLUTICASONE FUROATE(en)
    [0000000001021]CLOBETASONE BUTYRATE(en)
    [000000000565]BETAMETHASONE VALERATE(en)
    [0000000001822]FLUNISOLIDE HEMIHYDRATE(en)
    [0000000001948]FULVESTRANT(en)
    [000000000568]BETAMETHASONE DIPROPIONATE(en)
    [0000000007899]FLUOCORTOLONE CAPROATE(en)
    [0000000004264]FLUDROCORTISONE ACETATE(en)
    [0000000002535]MEDROGESTONE(en)
    [0000000007237]PARAMETHASONE ACETATE(en)
    [0000000003854]TRIAMCINOLONE ACETONIDE(en)
    [0000000005588]PREDNISOLONE METASULFOBENZOATE SODIUM(en)
    [0000000007231]METHYLPREDNISOLONE ACETATE STERILE(en)
    [0000000003853]TRIAMCINOLONE(en)
    [000000000986]CYPROTERONE ACETATE(en)
    [0000000007230]BUDESONIDE STERILE(en)
    [0000000008722]CANNABIDIOL (BY EXTRACTION)(en)
    [0000000001256]DESONIDE(en)
    [000000000665]BUDESONIDE(en)
    [0000000005969]DIFLORASONE(en)
    [0000000001821]FLUNISOLIDE(en)
    [0000000002151]HYDROCORTISONE HYDROGEN SUCCINATE(en)
    [0000000004228]DIFLUPREDNATE(en)
    [0000000004916]FLUDROXYCORTIDE(en)
    [0000000002633]METHYLPREDNISOLONE ACEPONATE(en)
    [0000000001223]DEXAMETHASONE(en)
    [0000000003700]TESTOSTERONE CYPIONATE(en)
    [0000000005452]HYDROCORTISONE ACETATE STERILE(en)
    [0000000007413]PREDNISOLONE ACETATE STERILE(en)
    [0000000004207]CHLORMADINONE ACETATE(en)
    [000000000100814]BREXANOLONE(en)

    3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES

    Active Substance:MEGESTROL ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BUSULFAN
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Highly toxic products
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing
    3.6.4  Biological Testing

    Active Substance:METHYLPREDNISOLONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TRIAMCINOLONE ACETONIDE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing
    3.6.4  Biological Testing

    Active Substance:CLOBETASOL PROPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MELPHALAN HYDROCHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Highly toxic products
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing
    3.6.4  Biological Testing

    Active Substance:TRIAMCINOLONE DIACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:METHYLPREDNISOLONE HYDROGEN SUCCINATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CYSTEAMINE BITARTRATE MONOHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:CANNABIDIOL (SYNTHETIC)
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DESOXIMETASONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DEXAMETHASONE SODIUM PHOSPHATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUMETASONE PIVALATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:VAMOROLONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MEDROXYPROGESTERONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FORMOTEROL FUMARATE DIHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DIFLORASONE DIACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:DELMADINONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TIROFIBAN HYDROCHLORIDE MONOHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing
    3.6.4  Biological Testing

    Active Substance:BECLOMETASONE DIPROPIONATE MONOHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:OSATERONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DESONIDE DISODIUM PHOSPHATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE-21-HEXANOATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUOCINOLONE ACETONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MIVACURIUM CHLORIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing
    3.6.4  Biological Testing

    Active Substance:FLUPREDNIDENE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:EXEMESTANE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE SODIUM PHOSPHATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:HALOMETASONE MONOHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TRIAMCINOLONE HEXACETONIDE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing
    3.6.4  Biological Testing

    Active Substance:CLOCORTOLONE PIVALATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE 17-VALERATE 21-ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:LOTEPREDNOL ETABONATE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing

    Active Substance:URSODEOXYCHOLIC ACID
    3.2 Extraction of Active Substance from Natural Sources
     
    3.2.5  Modification of extracted substance Animal 
    3.2.6  Purification of extracted substance Animal 
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:DIFLUCORTOLONE VALERATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:NORURSODEOXYCHOLIC ACID
    3.2 Extraction of Active Substance from Natural Sources
     
    3.2.5  Modification of extracted substance Animal 
    3.2.6  Purification of extracted substance Animal 
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:METHYLTESTOSTERONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUMETASONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MOMETASONE FUROATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:SALMETEROL XINAFOATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:FLUTICASONE PROPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BECLOMETASONE DIPROPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUDROCORTISONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:LOTEPREDNOL ETABONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUOROMETHOLONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:TRIAMCINOLONE HEXACETONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BECLOMETASONE DIPROPIONATE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing

    Active Substance:HYDROCORTISONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:AMCINONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUOCINONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUOCORTOLONE PIVALATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:PREDNICARBATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:HALCINONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MEDROXYPROGESTERONE ACETATE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing
    3.6.4  Biological Testing

    Active Substance:FLUTICASONE FUROATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:CLOBETASONE BUTYRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BETAMETHASONE VALERATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUNISOLIDE HEMIHYDRATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FULVESTRANT
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:BETAMETHASONE DIPROPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.4  Biological Testing

    Active Substance:FLUOCORTOLONE CAPROATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUDROCORTISONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MEDROGESTONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PARAMETHASONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TRIAMCINOLONE ACETONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE METASULFOBENZOATE SODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:METHYLPREDNISOLONE ACETATE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing
    3.6.4  Biological Testing

    Active Substance:TRIAMCINOLONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CYPROTERONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BUDESONIDE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:CANNABIDIOL (BY EXTRACTION)
    3.2 Extraction of Active Substance from Natural Sources
     
    3.2.1  Extraction of substance from plant source
    3.2.5  Modification of extracted substance Plant 
    3.2.6  Purification of extracted substance Plant 
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:DESONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BUDESONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DIFLORASONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUNISOLIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:HYDROCORTISONE HYDROGEN SUCCINATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DIFLUPREDNATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:FLUDROXYCORTIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:METHYLPREDNISOLONE ACEPONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:DEXAMETHASONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:TESTOSTERONE CYPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:HYDROCORTISONE ACETATE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing

    Active Substance:PREDNISOLONE ACETATE STERILE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.4 Manufacture of sterile Active Substance
     
    3.4.1  Aseptically prepared
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.3  Microbiological testing including sterility testing

    Active Substance:CHLORMADINONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BREXANOLONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    4. Other Activities - Active Substances:
    Importation of: L-TYROSINE (confidential), PREDNISOLONE (confidential), BETAMETHASONE (confidential), CHOLIC ACID (confidential), TESTOSTERONE (confidential), HYDROCORTISONE (confidential), PREGNENOLONE (confidential), METHYLPREDNISOLONE (confidential), BETAMETHASONE ACETATE (confidential)

    Clarifying remarks (for public users):
    Manufactured active substances (AS) marked as confidential are for clinical use. Imported AS marked as confidential undergo further processing within the importing site. Terminal sterilization by gamma irradiation is outsourced for Medroxyprogesterone acetate sterile, Triamcilonone esacetonide sterile and, as alternative to the sterile filtration, even for Beclometasone dipropionate sterile. According to Italian legislation, all the sterile active substances and/or biological active substances and/or active substances deriving from human and animal tissues, organs, fluids are authorized according to art. 40 of Dir. 2001/83/EC and the production process is performed in accordance with the EU-GMP, including its Annex 1, as laid down in Dir. 2003/94/EC. On a risk-based approach, the validity of the GMP certificate for this manufacturing site is not more than 36 months from the latest general GMP inspection conducted on 2025/03/14, except for AIFA's re-evaluation of the risk profile.

     

     


    		 
    		 
     
         
     
     
    		 
     
    The EudraGMDP database is maintained and operated by the EMA. Access to the general public is granted in order to enhance availability of information related to the EMA mandate. The content of the database is provided by the National Competent Authorities (NCA) of the EEA. For this reason, the EMA accepts no responsibility or liability whatsoever (including but not limited to any direct or consequential loss or damage it might occur to you and/or any other third party) arising out of or in connection with the information on this database. Any questions about the content should be addressed to the relevant NCA. Please click here to get list of NCA's.

    For the UK, as from 1.1.2021, EU Law applies only to the territory of Northern Ireland (NI) to the extent foreseen in the Protocol on Ireland/NI.

    Documents issued by UK authorities up to and including 31 December 2020 remain available for consultation in EudraGMDP. However, they are no longer included or updated from 1 January 2021, with the exception of the documents pertaining to sites located in Northern Ireland.
    [EMA © 2014. EudraGMDP 6.5.4.8 build 2026/01/16 09:45]