| 3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES |
Active Substance:ATIPAMEZOLE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: REACTION WITH HCL AND CRYSTALLIZAT FROM ETHYL ACETATE AND WATER
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING AND SCREENING
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:carazolol |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: PURIFICATION BY CRISTALIZATION WITH ISOPROPANOL
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, MILLING, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:CLOCINIZINE DIHYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: REACTION WITH HCL and crystallization METHANOL AND ALCOHOL
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, SCREENING, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:DETOMIDINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: REACTION WITH HCL AND CRYSTALLIZATION FROM TERT-BUTYL-METHYL-ETHER AND ISOPROPYL ALCOHOL
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, SCREENING, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:DEXMEDETOMIDINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: REACTION WITH HCL AND CRYSTALLIZATION FROM TERT-BUTYL-METHYL-ETHER AND ISOPROPYL ALCOHOL
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, SCREENING, RESECTED, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
Active Substance:EBASTINE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: PURIFICATION BY CRYSTALLIZATION FROM ISOPROPANOL/WATER AND MICRONIZATION
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, MILLING, AND HOMOGENISED / MICRONIZATION
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:MEDETOMIDINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: REACTION WITH HCL AND CRYSTALLIZATION FROM TERT-BUTYL-METHYL-ETHER AND ISOPROPY ALCOHOL
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, MILLING, RESECTED, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|
Active Substance:menbutone |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: PRODUCT FINAL CRISTALIZATION IN METHYL ISOBUTYL KETONE
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, SIEVING AND HOMOGENIZATION
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:PREDNISOLONE STEAGLATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: PURIFICATION BY CRYSTALLIZATION FROM ACETONITRILE
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, MILLING, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:PROPANOCAINE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: REACTION WITH HCL AND CRYSTALLIZAT FROM TERT-BUTYL-METHYL-ETHER AND ISOPROPYL ALCOHOL
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, SCREENING, AND HOMOGENISED
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:TOLFENAMIC ACID |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: 2 CRYSTALLIZATION FROM TOLUENE AND 2 CRYSTALLIZATION FROM METHYL ISOBUTYL KETONE
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: DRYING, SCREENING, AND HOMOGENISED
|
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
| 3.6.2 Microbiological testing excluding sterility testing |
|