EudraGMP Homepage      
 
 
MIA | GMP | API REG | WDA | GDP | Sites Help
Tue 10 Nov 2026 11:37:32 BST
GMP Compliance Menu 
Search
GMP Certificates
Non-Compliance Report


Print Preview
                   
Print Preview (Short version)
                  
Back To Search

 

Italian Medicines Agency

CERTIFICATE NUMBER: IT-API/17/H/2026

CERTIFICATE OF GMP COMPLIANCE OF A MANUFACTURER(1) , (2)

Part 1

Issued following an inspection in accordance with
Art. 111(5) of Directive 2001/83/EC as amended

The competent authority of Italy confirms the following:

The manufacturer: Newchem S.p.A.

Site address: Via Parco Del Ticino 10, San Martino Siccomario, 27028

OMS Organisation Id. / OMS Location Id.: ORG-100017847 / LOC-100026609


Is an active substance manufacturer that has been inspected in accordance with Art. 111(1) of Directive 2001/83/EC0.

From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on  2024-11-29 , it is considered that it complies with:

  • The principles of GMP for active substances referred to in Article 47 of Directive 2001/83/EC and an appropriate level of GMP as referred to in Article 46(f) of Directive 2001/83/EC.
    		•

    This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. Updates to restrictions or clarifying remarks can be identified through the EudraGMDP website (https://eudragmdp.ema.europa.eu/). This certificate is valid only when presented with all pages and both Parts 1 and 2.

     The authenticity of this certificate may be verified in EudraGMDP. If it does not appear, please contact the issuing authority.

    __________________________________________________________________________________________________________________________
    (1) The certificate referred to in paragraph Art. 111(5) of Directive 2001/83/ECis also applicable to importers.
    (2) Guidance on the interpretation of this template can be found in the Interpretation of the Union format for GMP certificate.
    (3) These requirements fulfil the GMP recommendations of WHO.

    Part 2

    Human Medicinal Products

    Manufacture of active substance. Names of substances subject to inspection:
    [000000000220]ALCLOMETASONE DIPROPIONATE(en)
    [0000000007720]BERAPROST SODIUM(en)
    [000000000611]BIMATOPROST(en)
    [0000000001203]DEFLAZACORT(en)
    [0000000002151]HYDROCORTISONE HYDROGEN SUCCINATE(en)
    [0000000002191]ILOPROST(en)
    [0000000002375]LATANOPROST(en)
    [000000000100878]LATANOPROSTENE BUNOD(en)
    [000000000100005]LIMAPROST ALFADEX(en)
    [0000000005780]MEPREDNISONE(en)
    [0000000002631]METHYLPREDNISOLONE ACETATE(en)
    [0000000002635]METHYLPREDNISOLONE HYDROGEN SUCCINATE(en)
    [0000000005588]PREDNISOLONE METASULFOBENZOATE SODIUM(en)
    [0000000003219]PREDNISOLONE SODIUM PHOSPHATE(en)
    [0000000003849]TRAVOPROST(en)
    [0000000003854]TRIAMCINOLONE ACETONIDE(en)

    3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES

    Active Substance:ALCLOMETASONE DIPROPIONATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:BERAPROST SODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Prostaglandins
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization, Salt formation
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

    Active Substance:BIMATOPROST
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Prostaglandins
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

    Active Substance:DEFLAZACORT
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:HYDROCORTISONE HYDROGEN SUCCINATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:ILOPROST
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    prostaglandins
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

    Active Substance:LATANOPROST
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Prostaglandins
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

    Active Substance:LATANOPROSTENE BUNOD
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Prostaglandins
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:LIMAPROST ALFADEX
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    prostaglandins
    3.1.3  Salt formation / Purification steps:
    Crystallization, Purification
    3.1.4  Other:
    complessazione
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Lyophilization, Sieving
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:MEPREDNISONE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    3.1.2  Manufacture of crude active substance
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:METHYLPREDNISOLONE ACETATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:METHYLPREDNISOLONE HYDROGEN SUCCINATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE METASULFOBENZOATE SODIUM
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:PREDNISOLONE SODIUM PHOSPHATE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization, Salt formation
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Sieving
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    Active Substance:TRAVOPROST
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Prostaglandins
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Chromatography
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)

    Active Substance:TRIAMCINOLONE ACETONIDE
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.1  Manufacture of active substance intermediates
    Special Requirements:
    7.Other:
    Other: Hormones or substances with hormonal activity
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Crystallization
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing

    4. Other Activities - Active Substances:
    Importation of: PREDNISOLONE (confidential), METHYLPREDNISOLONE (confidential), HYDROCORTISONE (confidential), BETAMETHASONE (confidential)

    Clarifying remarks (for public users):
    Imported active substances (AS) marked as confidential undergo further processing within the importing site and/or are released to other AS manufacturing sites for processing. PROSTAGLANDINS: no batch certification, except Limaprost Alfadex and Latanoprostene Bunod. On a risk-based approach the validity of the GMP certificate for this manufacturing site is not more than 42 months from the latest general GMP inspection conducted on 2024/11/29, except for AIFA’s re-evaluation of the risk profile

     

     


    		 
    		 
     
         
     
     
    		 
     
    The EudraGMDP database is maintained and operated by the EMA. Access to the general public is granted in order to enhance availability of information related to the EMA mandate. The content of the database is provided by the National Competent Authorities (NCA) of the EEA. For this reason, the EMA accepts no responsibility or liability whatsoever (including but not limited to any direct or consequential loss or damage it might occur to you and/or any other third party) arising out of or in connection with the information on this database. Any questions about the content should be addressed to the relevant NCA. Please click here to get list of NCA's.

    For the UK, as from 1.1.2021, EU Law applies only to the territory of Northern Ireland (NI) to the extent foreseen in the Protocol on Ireland/NI.

    Documents issued by UK authorities up to and including 31 December 2020 remain available for consultation in EudraGMDP. However, they are no longer included or updated from 1 January 2021, with the exception of the documents pertaining to sites located in Northern Ireland.
    [EMA © 2014. EudraGMDP 6.5.4.8 build 2026/01/16 09:45]