| 3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES |
Active Substance:amisulpride |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:BETAHISTINE DIHYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization.
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:BETAHISTINE DIMESYLATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:bromopride |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:DEQUALINIUM CHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:DIBROMPROPAMIDINE ISETIONATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:3 -(DIPHENYLMETHOXY)-8-ISOPROPYLNORTROPAN MESYLATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:HISTAMINE DIHYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:lacidipine |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:MIANSERIN HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and final filtration
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying and milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:OCTENIDINE DIHYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation / final filtration
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying and milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:PICLOXYDINE DIHYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:PROPAMIDINE ISETIONATE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying, milling
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:SULPIRIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Purification acid/base
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:TIAPRIDE HYDROCHLORIDE |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: Salt formation and crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|
Active Substance:VENETOCLAX |
|
3.1
|
Manufacture of Active Substance by Chemical Synthesis
|
| |
| 3.1.1 Manufacture of active substance intermediates |
| 3.1.2 Manufacture of crude active substance |
| 3.1.3 Salt formation / Purification steps: crystallization
|
|
|
3.5
|
General Finishing Steps
|
| |
| 3.5.1 Physical processing steps: Drying
|
| 3.5.2 Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance) |
| 3.5.3 Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance) |
|
|
3.6
|
Quality Control Testing
|
| |
| 3.6.1 Physical / Chemical testing |
|