EudraGMP Homepage      
 
 
MIA | GMP | API REG | WDA | GDP | Sites Help
Tue 10 Nov 2026 18:39:44 BST
GMP Compliance Menu 
Search
GMP Certificates
Non-Compliance Report
  
The Certificate has been withdrawn, withdrawn date is : 2026-08-06


Print Preview
                   
Print Preview (Short version)
                  
Back To Search

 

Regierung Von Oberbayern

CERTIFICATE NUMBER: DE_BY_04_GMP_2026_0078

CERTIFICATE OF GMP COMPLIANCE OF A MANUFACTURER(1) , (2)

Part 1

Issued following an inspection in accordance with
Art. 111(5) of Directive 2001/83/EC as amended

The competent authority of Germany confirms the following:

The manufacturer: Symbiotec Pharmalab Limited

Site address: Plot No 5 6 7 And 8, Pharma Zone Phase II Indore Special Economic Zone, Pithampur, Dhar, Madhya Pradesh, 454774, India

OMS Organisation Id. / OMS Location Id.: ORG-100018972 / LOC-100027744

 DUNS Number: 67-760-4336

Is an active substance manufacturer that has been inspected in accordance with Art. 111(1) of Directive 2001/83/EC1 transposed in the following national legislation:Sect. 64 para 1 and 3 German Medicinal Product Act.

From the knowledge gained during inspection of this manufacturer, the latest of which was conducted on  2026-03-20 , it is considered that it complies with:

  • The principles of GMP for active substances referred to in Article 47 of Directive 2001/83/EC and an appropriate level of GMP as referred to in Article 46(f) of Directive 2001/83/EC transposed in the following national legislation:Sect. 64 para 1 and 3 German Medicinal Product Act.
    		•

    This certificate reflects the status of the manufacturing site at the time of the inspection noted above and should not be relied upon to reflect the compliance status if more than three years have elapsed since the date of that inspection. However, this period of validity may be reduced or extended using regulatory risk management principles by an entry in the Restrictions or Clarifying remarks field. Updates to restrictions or clarifying remarks can be identified through the EudraGMDP website (https://eudragmdp.ema.europa.eu/). This certificate is valid only when presented with all pages and both Parts 1 and 2.

     The authenticity of this certificate may be verified in EudraGMDP. If it does not appear, please contact the issuing authority.

    __________________________________________________________________________________________________________________________
    (1) The certificate referred to in paragraph Art. 111(5) of Directive 2001/83/ECis also applicable to importers.
    (2) Guidance on the interpretation of this template can be found in the Interpretation of the Union format for GMP certificate.
    (3) These requirements fulfil the GMP recommendations of WHO.

    Part 2

    Human Medicinal Products

    Manufacture of active substance. Names of substances subject to inspection:
    [00025714-00001]Abiraterone Acetate(en)
    [00025714-00002]Betamethasone(en)
    [00025714-00003]Hydrocortisone(en)
    [00025714-00004]Hydrocortisone Acetate(en)
    [00025714-00006]Levonorgestrel(en)
    [00025714-00010]Methylprednisolone(en)
    [00025714-00013]Estrone(en)
    [00025714-00014]Triamcinolone Acetonide(en)
    [00025714-00015]Drospirenone(en)
    [00025714-00018]Estradiol Hemihydrate(en)
    [00025714-00020]Ethinyl Estradiol(en)
    [00025714-00022]Prednisolone(en)
    [00025714-00023]Prednisolone Acetate(en)
    [00025714-00024]Progesterone(en)
    [00025714-00025]Testosterone(en)
    [00025714-00027]Hydroxyprogesterone caproate(en)
    [00025714-00028]Nandrolone Decanoate(en)
    [00025714-00029]Prednisolone Sodium Phosphate(en)
    [00025714-00031]Testosterone Cypionate(en)
    [00025714-00032]Testosterone Undecanoate(en)
    [00025714-00033]Dehydroepiandrosterone (Prasterone)(en)
    [00025714-00034]Testosterone Enanthate(en)
    [00025714-00035]Flumethasone(en)
    [00025714-00036]17-Alpha Hydroxyprogesterone(en)
    [00025714-00037]Exemestane(en)
    [00025714-00039]Conjugated Estrogens(en)
    [00025714-00040]Dihydrotestosterone (Stanolone/Androstanolone)(en)

    3. MANUFACTURING OPERATIONS - ACTIVE SUBSTANCES

    Active Substance:Abiraterone Acetate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Betamethasone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Hydrocortisone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Hydrocortisone Acetate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Levonorgestrel
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Methylprednisolone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Estrone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Triamcinolone Acetonide
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Drospirenone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Silica Gel Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Estradiol Hemihydrate
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Ethinyl Estradiol
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Prednisolone
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Prednisolone Acetate
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Progesterone
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Testosterone
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Hydroxyprogesterone caproate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Nandrolone Decanoate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Prednisolone Sodium Phosphate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Testosterone Cypionate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Testosterone Undecanoate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Dehydroepiandrosterone (Prasterone)
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Testosterone Enanthate
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Flumethasone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:17-Alpha Hydroxyprogesterone
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Exemestane
    3.3 Manufacturing of Active Substance using Biological Processes
     
    3.3.1  Fermentation
    3.3.3  Isolation / Purification
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying, Micronization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Conjugated Estrogens
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Lyophilization
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Active Substance:Dihydrotestosterone (Stanolone/Androstanolone)
    3.1 Manufacture of Active Substance by Chemical Synthesis
     
    3.1.2  Manufacture of crude active substance
    3.1.3  Salt formation / Purification steps:
    Activated Carbon Treatment, Crystallisation, Filtration
    3.5 General Finishing Steps
     
    3.5.1  Physical processing steps:
    Drying
    3.5.2  Primary Packaging (enclosing / sealing the active substance within a packaging material which is in direct contact with the substance)
    3.5.3  Secondary Packaging (placing the sealed primary package within an outer packaging material or container. This also includes any labelling of the material which could be used for identification or traceability (lot numbering) of the active substance)
    3.6 Quality Control Testing
     
    3.6.1  Physical / Chemical testing
    3.6.2  Microbiological testing excluding sterility testing

    Clarifying remarks (for public users):
    Manufacturing of active substances in manufacturing facilities Unit 01, Unit 02, Unit 04, Unit 05, Unit 06 (L-02/03/04), Unit 07. This certificate is only valid for active pharmaceutical ingredients, which were manufactured in compliance with EU-GMP (according to applicable guidelines of EudraLex Vol. 4). The applicant for third-county-inspection and importer of the active pharmaceutical ingredients is the company: Flavine Europe GmbH Wehrlestr. 12 81679 München

     

     

    Withdrawal comments in English: GMP certificate has been superseded by document with the number DE_BY_04_GMP_2026_0111
    Withdrawal comments in National Language: Das GMP-Zertifikat wurde ersetzt durch das Dokument mit der Nummer DE_BY_04_GMP_2026_0111

    		 
    		 
     
         
     
     
    		 
     
    The EudraGMDP database is maintained and operated by the EMA. Access to the general public is granted in order to enhance availability of information related to the EMA mandate. The content of the database is provided by the National Competent Authorities (NCA) of the EEA. For this reason, the EMA accepts no responsibility or liability whatsoever (including but not limited to any direct or consequential loss or damage it might occur to you and/or any other third party) arising out of or in connection with the information on this database. Any questions about the content should be addressed to the relevant NCA. Please click here to get list of NCA's.

    For the UK, as from 1.1.2021, EU Law applies only to the territory of Northern Ireland (NI) to the extent foreseen in the Protocol on Ireland/NI.

    Documents issued by UK authorities up to and including 31 December 2020 remain available for consultation in EudraGMDP. However, they are no longer included or updated from 1 January 2021, with the exception of the documents pertaining to sites located in Northern Ireland.
    [EMA © 2014. EudraGMDP 6.5.4.8 build 2026/01/16 09:45]